The HECU sends requirement data, such as torque reduction, the number of fuel cut cylinders, and the ESP control request, to the PCM(ECM & TCM) through CAN bus line. The PCM(ECM) performs the fuel cut function according to a request signal from the HECU and then retards an ignition timing. The PCM(TCM) maintains current gear position during the ESP control period in order not to increase power which causes a Kickdown shift.
The HECU checks the CAN communcation lines for the normal ESP control, and sets this code if the data received from EMS is not the same with that from TCM.
Item
Detecting Condition
Possible cause
DTC Strategy
CAN message monitoring
Faulty PCM(ECM)
Faulty HECU
Enable Conditions
In case that the information about transmission is different in the EMS message and TCM message within normal voltage condition.
Fail Safe
Inhibit the ESP/DBC control and allow the ABS/EBD control.
The ESP/DBC warning lamp is activated.