Follow us on Twitter and win Autohex II Scan Tool for Kia and Hyundai (worth 945.00 USD)

B2500 Warning lamp Failure

AutoHex Online Help: Hyundai i30(FDe) 2012
Component Location
General Description

Air bag warning lamp is located at cluster

When key is in 'ignition on' position, SRSCM performs diagnosis of overall air bag system.If there's no fault, air bag.

Warning lamp in cluster flickers for a whlie and then goes out.

SRSCM measures voltage of out terminal of warning lamp to check if warnning lamp is operated in accordance with signal SRSCM sends.



DTC Description

The SRSCM sets DTC B2500 if there is an open circuit or short to ground in air bag circuit harness.

DTC Detecting Condition

Item

Detecting Condition

Possible cause

DTC Strategy

Check voltage

Burnt-out fuse.

Burnt-out warning lamp.

Open circuit in warning lamp harness.

Short circuit in warning lamp harness.

Faulty SRSCM.

Case 1

Enable

conditions

Ignition "ON"

When AWL is commanded ON by the ACU and Shorted to Battery

Threshold value

Battery voltage > 1.5 V

Case 2

Qualification

Ignition "ON"

When AWL is commanded OFF by the ACU and Open or shorted to ground

De-Qualification

Battery voltage < 5 V

Diagnostic Time

Qualification

More than 1.2 sec remaining

De-Qualification

More than 2(Open)~17(Short) sec remaining

Diagnostic Circuit Diagram