EPS provides different assist force according to vehicle speed while engine ON. A vehicle speed signal must be inputted normally to EPS CM for normal EPS control.
EPS CM sets this code if EPS CM doesn't receives a vehicle speed signal from EMS normally.
At that time it controls EPS system by using predefined vehicle speed value.
Item
Detecting Condition
Possible cause
DTC Strategy
Check received message from ECM
Faulty ECM
Enable Conditions
IG ON
Threshold Value
Vehicle speed signal is INVALID
Fail Safe
EPS CM sets vehicle speed as 40kph (25mile).
Restoration Conditions
Received vehcle speed signal from ECM is normal.