Follow us on Twitter and win Autohex II Scan Tool for Kia and Hyundai (worth 945.00 USD)
P1630 TCU Communication Line Malfunction
AutoHex Online Help: Hyundai TERRACAN(HP) 2003
DTC TROUBLESHOOTING PROCEDURE
DTC P1630 | CONTROL MODULE COMMUNICATION ERROR |
DTC DETECTING CONDITIONItem | Detecting Contion | Possible cause |
DTC Strategy | ? | ? Open or Short in CAN communication harness ? Faulty ECM ? Faulty TCM |
Enable Conditions | ? After 0.2sec. passed from IG ON. |
Threshold Value | ? To detect the BUS OFF signal in CPU. |
Diagnostic Time | ? for 0.2sec. |
Fail Safe | ? Line Pressure is full. ? No Torque Reduction at shifting/Squat Control/Up Slope Mode/Down Slope Mode/L-UP/Coast Control. ? TCU judges Throttle Opening is 0% for shifting. ? To inhibit failure detection(No ID/L4 SW Malfunction/Engine High Range/Transmission Fluid Sensor/SOL Malfunction). ? TCU judges Engine Water Temperature is normal condition(80Degrees)/Engine Revolution 7000rpm/Engine Torque 350Nm/Driving cycle Detect. |
Pass Criteria | ? To detect the BUS normal signal for 2.0sec continuously |