Follow us on Twitter and win Autohex II Scan Tool for Kia and Hyundai (worth 945.00 USD)

P2563 Turbocharger Boost Control Position Sensor "A" Circuit Range/Performance

AutoHex Online Help: Hyundai GENESIS COUPE(BK) 2012
Component Location
General Description

Turbo charger controlled by ECU is being applied recently. ECU calculates the optimized fuel ratio by measuring the accurate air mass from turbo charger.

If the boost pressure from intake manifold reaches target pressure value, ECU makes a part of exhaust gas bypass.

Concentrated mix gas makes much higher horse power in explosion cycle.



DTC Description

ECU shows this DTC when target value and current value of EWGA have a gap abnormally.

DTC Detectiong Condition

Item

Detecting Condition

Possible Cause

DTC Strategy

Plausibility check

Check EWGA

Check W/G VALVE

Enable Conditions

Battery voltage is higher than 10v and lower than 16v.

Coolant temp. is higher than 122?.

Atmosphere temp. is higher than 14?.

Engine running

Threshold Value

Difference between target value and current value is larger than 9~100% ??.

Diagnostic Time

5sec

MIL On Condition

Two trips

Specification

DC - MOTOR(EWGA)

SUPPLY VOLTAGE RANGE

Max CURRENT

10 ~ 16V

8.5A

Diagnostic Circuit Diagram
Signal Waveform & Data