Component Location
General Description
DCT system is installed 2 Clutchs. The Clutch1 is in charge of 1st, 3rd, 5th gear shift, and The clutch2 is in charge of 2nd, 4th, 6th, Reverse gear shift. The clutch1 is controlled by clutch1 motor and clutch2 is controlled by clutch2 motor.
DTC Description
TCM set this code when Clutch is not operated correctly.
DTC Detecting Condition
Item | Detecting Condition | Possible cause |
DTC Strategy | Check the Clutch operation
| DCT
|
Enable Conditions | Driving
|
Threshold Value | End stop position < 0.053mm
|
Diagnostic Time | More than 3 times.
|
Fail Safe | Drive at Even gear
|
Clutch Actuator
Composition :Lever, Roller, Base Plate, Motor, Spring
Weight : Clutch 1 (2.3 kg), Clutch 2 (2,3 kg)
Operation Speed : 100 ms (Initialization : Touch Point) / 150ms (Max. Torque)
Current : 60A (Pick), 15A(Continuous)
Operation force : 2,500 N
Use temperature : -40? ~ 105?