Fig.1) Battery
Fig.2) SRSCM
The SRSCM sets DTC B110200 and turns warning light on if voltage threshold value is detected for more than 4 sec.
(If voltage within threshold value is detected When the SRSCM returns to normal condition. SRSCM regards DTC as being cleared and turns warning light off).
The SRSCM sets DTC B110200 and turns warning light on if voltage threshold value is detected for more than 4 sec. (If voltage within threshold value is detected When the SRSCM returns to normal condition. SRSCM regards DTC as being cleared and turns warning light off).
Item
Detecting Condition
Possible cause
DTC Strategy
Check voltage
Poor connection of connected part.
Open/Short circuit in power harness.
Open/Short circuit in ground harness.
Faulty charging system.
Check SRSCM
Enable Conditions
Ignition "ON"
Threshold Value
6 < Vbatt < 8V
Diagnostic Time
Qualification
More than 4s (100ms x 40)
De-Qualification
Test Condition
Voltage
Idle & WOT
Approx. 8 = Vbatt = 16