Follow us on Twitter and win Autohex II Scan Tool for Kia and Hyundai (worth 945.00 USD)
C1662 Auto Learning failure
AutoHex Online Help: Hyundai GRANDEUR/AZERA(HG) 2012
Component Location
General Description
The TPMS is the acronym for Tire Pressure Monitoring System. This system monitors the pressure of the tire and when it drops below a certain pressure, the TPMS ECU makes the warning lamp turn on for notifying the driver. This system consists of TPMS ECU(or TPMS Receiver)and TPMS sensors. Among components of TPMS system, the TPMS sensor is installed at each wheel rim. and its role is to measure the air pressure and the temperature of the tire and then it transmits its signals to TPMS ECU. The communication from TPMS sensors is done via RF(Radio Frequency) at a frequency.The "Auto Learning" is a function where a new sensor's ID is automatically registered in the TPMS ECU. The vehicle should be driven at approx.20 km/h for about 10~20 minutes after replacing a sensor.
DTC Description
TPMS ECU set this DTC if TPMS ECU can not detect the sensor after completed learnt for 15min.
DTC Detecting Condition
Item | Detecting Condition | Possible Cause |
DTC Strategy | During auto-learning, Check its sensor's ID
| Sensor Temporary wave interference around sensors |
Enable Conditions | After completing its auto-learning procedure,
|
Threshold value | TPMS ECU set this DTC if TPMS ECU can not detect the sensor after completed learnt for 15min.
|