The ABS ECU(Electronic Control Unit) monitors the system (battery) voltage. The normal system voltage range is essential for controlling the ABS system as intended.
When the voltage is lower than the expected normal value, this code is set.
If the voltage recovers, to within normal operating range, then the controller returns to normal operations as well.
Item
Detecting Condition
Possible cause
DTC Strategy
Battery Voltage Monitoring
Poor connection in power supply circuit (IGN+)
Faulty HECU
Discharge of electricity
Enable Conditions
When Vign<9.5V±0.5V is continued for 500msec during Vref >= 7Km/h.
When Vign<8.5V±0.5V is continued for 500msec during Vref < 7Km/h or ABS/ESP control.
- If IGN voltage is recovered to normal operating voltage, the system recovers to normal state.
Fail Safe
Outside the ABS control cycle : Inhibit the ABS/ESP/DBC control, allow the EBD control , The ABS/ESP/DBC warning lamps are activated, When the voltage recovers the normal operating range, erase the error code.
Inside the ABS control cycle : Inhibit the ABS/ESP/DBC control. The ABS/ESP/DBC warning lamps are activated. Althought the voltage recovers the normal operating range, warning lamps are illuminated and the error code is always stored.
Normal Voltage Range
ENG "ON"
10V ~ 16V